GLRC 2026
Participate Home Rounds Awards Training Blog FAQ
Resources Resources Support

How to Manage Time on a Logic Test Without Losing Your Place

Blog › Exam Preparation

· by Julia Berens · 5 min read

Learning how to manage time on a logic test starts with telling the difference between a hard question and a stalled attempt. If each clue you apply rules out another possibility, you may be making good use of your time. If you have read the same clue three times and still have no idea what to try, another minute may not help. A two pass strategy gives you a way to move on without throwing away the work you have already done.

How to manage time on a logic test in two passes

First, check whether the test lets you return to earlier questions and whether you can use scratch paper or an on-screen tool. The two pass strategy works when you can revisit items. If the test locks each answer as you move forward, use the same progress checks to decide how long to work, but make your final choice before leaving the question.

On the first pass, aim to reach every question and finish the ones where you can make steady progress. On the second pass, choose among the questions you set aside. That second pass is not just whatever time happens to be left. Pick a clock reading that tells you when to switch, and leave a little time at the end to check that you recorded your answers as intended.

For example, in a 30-minute practice set, you might try 18 minutes for the first pass, 10 for the second, and 2 for checking. Treat those numbers as a starting point, not a rule. If some questions are worth more than others, or several questions share the same setup, equal time per question may not make sense. For a timed trial, choose a short set from the training and practice problems.

First pass decisions based on progress

Give the question a fair start. Read what it asks for, identify the conditions you need to use, and try one concrete move. That could mean placing a fixed item in a schedule, testing an answer choice against a condition, or writing down the two cases that cover all possibilities. The goal is not to solve the whole question immediately. It is to find out whether your approach is taking you somewhere.

  • Keep working if your last step settled something and you know what to try next. Crossing out a case, fixing a position, or narrowing the answer to two choices all count as progress.
  • Try one reset if your setup feels confused. Reread the actual task, especially words such as must or could, or switch from a crowded sketch to a short list.
  • Move on if the reset sends you back through the same steps, you cannot name a new move, or continuing would keep you from reaching other questions before your planned switch.

Do not stay just because you have already spent two minutes on a question. Those minutes are gone whether you stay or leave. Judge the next minute by what you can do with it. If you can test the last remaining case, staying may make sense. If you would spend it staring at the same diagram, mark the question and move.

A restart note that fits on one line

A flag tells you where to return. A restart note tells you what to do when you get there. On whatever scratch space the rules permit, write the question number, one result you trust, and the next move. If you drew a diagram, put the note beside it so you do not have to hunt for the right sketch. A note like Q7: hard saves almost no work.

Suppose four talks, A, B, C, and D, fill four slots. A must be before C, B must go immediately after D, and C cannot be fourth. You have found that the pair D and B cannot occupy slots 3 and 4: that would force C into slot 2. Wait before writing that down as a result. Slot 2 is allowed for C, so the pair can occupy slots 3 and 4. This is exactly why a restart note should distinguish a checked result from a hunch.

A checked result is that the pair cannot occupy slots 1 and 2. That would leave slots 3 and 4 for A and C, forcing C into the forbidden fourth slot. Your note could read: Q7 | DB 1-2 ruled out | test DB 2-3 next. On your return, test that placement before rereading the entire problem. With D and B in slots 2 and 3, A and C would have to occupy slots 1 and 4, again putting C fourth. Now you know D and B must occupy slots 3 and 4.

Second pass priorities and a clean finish

Do not automatically return to the first question you skipped. Start with a question whose note gives you an immediate move, especially if finishing it would also help with other questions that share its setup. If two items look equally close to done and the test shows different point values, use those values to help choose.

A second pass is not a promise to finish every skipped item. Give a promising approach enough time to run, but if it stalls again, switch to another item while you still have a choice. Near the end, check the scoring instructions before deciding what to do with unanswered items. Then verify that the answers you meant to submit are actually selected or entered. If you change an answer, do it because you spotted a specific mistake or found a stronger reason, not just because the clock is running down.

Practice the skip and the return

During your next timed set, pick one question to mark as soon as you catch yourself repeating a step. Leave a one-line note and work on something else. When you return, see whether the note lets you make a move without reconstructing the setup. If it does not, revise the note after the timer stops. Replace something vague like check cases with the name of the case you still need to test.

To see where this practice fits in GLRC, check how the competition rounds work. The Qualification Round has a submission deadline, so use a separate timed practice set to rehearse making these decisions under a countdown.

Frequently asked questions

How long should I work before skipping?
There is no fixed limit for every question. If a quick reset still leaves you repeating steps or unable to name a new move, leave a note and go on.

What if I have nothing to write in my restart note?
Write down the exact point of confusion, such as “Q8: check whether adjacent can be either order.” That gives you a specific task when you return.

Should I revisit skipped questions in order?
Not necessarily. Start with a question where your note gives you a move you can make right away, while taking point values into account if they differ.

About the Global Logic and Reasoning Competition: an online logic and reasoning competition for high school students from around the world. How the rounds work

Written by Julia Berens, Social Media Assistant of the GLRC team.

More articles

All articles